cystech electronics corp. spec. no. : c191f2 issued date : 2013.01.09 revised date : page no. : 1/4 MSR0860AF2 cystek product specification 8amp. super fast plastic rectifiers MSR0860AF2 features ? 175 operating junction temperature ? low leakage current i f(av) 8a v rrm 600v i fsm 125a trr 25ns tj 175 c v f(max) 2v ? low switching loss, high efficiency ? high forward surge capability ? insulating package, in sulating voltage=2500v ac ? high temperature soldering guaranteed : 260 /40s, 0.25?(6.35mm) from case ? pb-free lead plating package mechanical data ? case: ito-220ac molded plastic ? mounting position: any ? weight: 1.85 grams, 0.065 ounce approximately ? terminals: pure tin plated, sold erable per j-std-002 and jesd22-b102 ? epoxy: ul 94v-0 rate flame retardant ? mounting torque: 10 in.-lb. maximum equivalent circuit outline ito-220ac MSR0860AF2 k a
cystech electronics corp. spec. no. : c191f2 issued date : 2013.01.09 revised date : page no. : 2/4 MSR0860AF2 cystek product specification maximum ratings and electrical characteristics ( rating at 25 c ambient temperature unless otherwise sp ecified. single phase, half wave, 60hz, resistive or inductive loa d. for capacitive load, derate current by 20%.) parameter symbol min. typ. max. units maximum recurrent peak reverse voltage v rrm 600 v maximum rms voltage v rms 420 v maximum dc blocking voltage v dc 600 v maximum instantaneous forward voltage at i f =8a v f 1.8 2 v maximum average forward rectified current @ t c =100 i f(av) 8 a non-repetitive peak forward surge current @ 8.3ms single half sine wave superimposed on rated load (jedec method) i fsm 125 a v r =600 v, t c =25 0.025 maximum instantaneous reverse current at v r =600 v, t c =125 i r 5 ma maximum reverse recovery time i f =1a, v r =30v, di f /dt=100a/ s trr 16 25 ns typical junction capacitance @ f=1mhz and applied 4v reverse voltage c j 23 pf isolation voltage from terminal to heatsink, t=1minute v ac 2500 v storage temperature range t stg -65 +175 operating junction temperature range t j -65 +175 thermal data parameter symbol value unit maximum thermal resistance, junction-to-case r th,j-c 5 c/w maximum thermal resistance, junction-to-ambient r th,j-a 60 c/w ordering information device package shipping MSR0860AF2 ito-220ac (rohs compliant package) 50 pcs / tube, 40 tubes/box
cystech electronics corp. spec. no. : c191f2 issued date : 2013.01.09 revised date : page no. : 3/4 MSR0860AF2 cystek product specification characteristic curves forward current derating curve 0 1 2 3 4 5 6 7 8 9 0 25 50 75 100 125 150 175 200 case temperature---tc() average forward current---io(a) resistive or inductive load forward current vs forward voltage 1 10 100 1000 10000 100000 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 forward voltage---v f (v) instantaneous forward current---i f (ma) pulse width=300s, 1% duty cycle tj=25 reverse leakage current vs reverse voltage 0.001 0.01 0.1 1 0 100 200 300 400 500 600 reverse voltage---v r (v) reverse leakage current---i r (a) t j =25 junction capacitance vs reverse voltage 1 10 100 1000 0.1 1 10 100 reverse voltage---v r (v) junction capacitance---c j (pf) tj=25, f=1.0mhz maximum non-repetitive forward surge current 0 20 40 60 80 100 120 140 1 10 100 number of cycles at 60hz peak forward surge current---i fsm (a) tj=25, 8.3ms single half sine wave jedec method
cystech electronics corp. spec. no. : c191f2 issued date : 2013.01.09 revised date : page no. : 4/4 MSR0860AF2 cystek product specification ito-220ac dimension important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance . marking: 2-lead ito-220ac plastic package cystek package code: f2 logo device name date code 1 2 style: pin 1.cathode 2.anode k a
|
